BattleMeshV3/NodeConfigScript/Batman here.

opkg update
opkg install kmod-batman-adv-kernelland

set -a

HOSTNAME="@PARAM1@"
WIRED_IP="@PARAM2@"
WIRELESS_IP="@PARAM3@"
CHANNEL="@PARAM4@"
CELL="@PARAM5@"

# setting wireless config
DEVICE=`uci get wireless.@wifi-iface[0].device`
uci delete wireless.$DEVICE.disabled
uci delete wireless.@wifi-iface[0].network
#uci delete wireless.@wifi-iface[0].rate

uci set wireless.$DEVICE.channel=$CHANNEL
uci set wireless.$DEVICE.hwmode=11g
uci set wireless.$DEVICE.txpower=20

uci set wireless.@wifi-iface[0].network=wlan
uci set wireless.@wifi-iface[0].ssid=wbm_batman
uci set wireless.@wifi-iface[0].encryption=none
uci set wireless.@wifi-iface[0].bssid=$CELL
uci set wireless.@wifi-iface[0].rate=54M
uci set wireless.@wifi-iface[0].bgscan=0
uci set wireless.@wifi-iface[0].mode=ahdemo

uci set network.wlan=interface
uci set network.wlan.proto=static
uci set network.wlan.ipaddr=$WIRELESS_IP
uci set network.wlan.netmask=255.255.255.0
uci commit wireless && wifi
uci commit network

#[edit] Configure the daemon
#
uci set network.batman=interface
uci set network.batman.ifname=bat0
uci set network.batman.proto=static
uci set network.batman.ipaddr=$WIRELESS_IP
uci set network.batman.netmask=255.255.255.0
#uci set network.batman.gateway=""



uci set batman-adv-kernelland.general.interface="$DEVICE"

## Enabling syslogging to remote target ##
#
#uci set system.@system[0].log_ip="$LOG_IP"

uci commit


#[edit] Enable daemon
#
[ -f /etc/init.d/batman-adv-kernelland ] && {
  /etc/init.d/batman-adv-kernelland enable
  /etc/init.d/batman-adv-kernelland start
} || {
  echo "ERROR: couldn't find batman init scripts, exiting..."
  exit 1
}


#[edit] Disable daemon
#
#[ -f /etc/init.d/batman-adv-kernelland ] && { 
#  /etc/init.d/batman-adv-kernelland stop 
#  /etc/init.d/batman-adv-kernelland disable 
#}

#[edit] Enable batman-remote-logger
#
#[ -f /etc/init.d/batman-remote-logger.sh ] && {
#  /etc/init.d/batman-remote-logger.sh enable
#  /etc/init.d/batman-remote-logger.sh start
#}

#[edit] Disable batman-remote-logger
#
#[ -f /etc/init.d/batman-remote-logger.sh ] && { 
#  /etc/init.d/batman-remote-logger.sh stop 
#  /etc/init.d/batman-remote-logger.sh disable 
#}

#[edit] Verbose BATMAN log-level
#
#[ -f /usr/sbin/batctl ] && {
#  batctl ll 15
#}

#[edit] Quiet BATMAN log-level
#
#[ -f /usr/sbin/batctl ] && { batctl 0 }

reboot 
exit