= BattleMeshV7 Tests =

<<TableOfContents>>

== General Rules ===
 * same routing protocol revision and configuration for every test
 * routing protocols are tested in turn (i.e. not altogether)
 * cpu and memory consumption should be tracked during each test
 * no points, just results and a final analysis

== Tests ==

 1. [[http://www.chemnitz.freifunk.net/wp-content/uploads/2014/05/Scenario-1-The-Hidden-Node-Problem.pdf|The Hidden Node Problem]]
 2. [[http://www.chemnitz.freifunk.net/wp-content/uploads/2014/05/Scenario-2-The-PowerLAN-Conundrum.pdf|The PowerLAN Conundrum]]
 3. [[http://www.chemnitz.freifunk.net/wp-content/uploads/2014/05/Scenario-3-The-Mesh-of-Death-Adversity.pdf|The Mesh of Death Adversity]]
 4. [[http://www.chemnitz.freifunk.net/wp-content/uploads/2014/05/Scenario-4-The-Convergence-Time-Relay.pdf|The Convergence Time Relay]]
 5. [[http://www.chemnitz.freifunk.net/wp-content/uploads/2014/05/Scenario-5-The-Crossed-Streams-Jeopardy.pdf|The Crossed Streams Jeopardy]]

Each testing team will have its own [[http://www.chemnitz.freifunk.net/wp-content/uploads/2014/05/Team-Banners.pdf|team banner]] so that you can easily tell who is working on which problem.

== Nodes and @IP ==

Please look at the bottom of the page!


== Packages needed for the experiments ==

Here you should add all the packages needed owing to perform the experiments. There will be 6 sections (general + each scenario). Each responsable of the tests, feel free to modify this section.


=== General ===
  - iperf

=== Hidden Node ===

  - Deployment scenarion
   - UBNT PicoStation M2 HP
   - AP
   - Clients 1 and 4 not hidden 
   - Clients 2 and 3 hidden between eachother and other nodes.
 


=== PowerLAN ===

    - Netperf Ping Test
   - ./netperf-wrapper -H 192.168.1.2 ping
  - ./netperf-wrapper -p totals -S --disable-log -i ping-2014-05-14T145415.633021.json.gz -o test1.png


=== Mesh of Death ===

  - 

=== Convergence Time Relay ===

  - 

=== Crossed Streams ===

  - 


== Nodes and its IPs (again) ==